Open Scissor Jaw for Easy Cable Insertion
Tested up to 75kV – For use in live line applications without damage to internal circuitry
One Hand Operation
180˚ rotating head for ease of use and manueverability
Rapid Advance
Compatible with all Huskie 14.4V Li-Ion batteries
Ergonomically designed and balanced
Audible Bypass when Predetermined Pressure is Achieved
For Copper and Aluminum Only
5 Yr. Tool, Battery & Charger Warranty
REC-B634YC
Description
6.6 Ton Cutting Tool
Large copper cable cutting is finally made easy with the REC-B634YC – just pull the trigger and 6.6 tons immediately goes to work for you. The hydraulic system now features a rapid advance for reduced cycle times. This tool is similar to the REC-B630Y|but has a slightly larger jaw opening without a "keeper" guard. Its sharp blades are rated for copper and aluminum cables only|up to 800 MCM or 1.4" Al outside diameter.; The open "C" type jaw is very convenient for the operator when reaching out to cut cable|as opposed to latching a cutting jaw around the cable. The jaws will accept a maximum of 800 MCM copper or aluminum cables up to 1.4." Distortion of the cable is minimal and cables can still be sleeved easily. Once the cable is severed|the cutter blades can be opened by the push of the release trigger located below the activation trigger – one finger is all that is needed to cut and release the tool.; NOTE: DO NOT CUT STEEL.
6.6 Ton Cutting Tool
Aluminum 1.4″ OD
Copper 800 MCM
ACSR – Do Not Cut
Product Number | Description |
---|---|
REC-B634YC | 6.6 Ton Cutting Tool, (2) 14.4V/4.0Ah Li-Ion, 120VAC Charger, Tool Case |
REC-B634YCDC | 6.6 Ton Cutting Tool, (2) 14.4V/4.0Ah Li-Ion, 12VDC Charger, Tool Case |
REC-B634YCX | 6.6 Ton Cutting Tool, Tool Case (No Batteries/Charger) |