Open Scissor Jaw for Easy Cable Insertion
Tested up to 75kV – For use in live line applications without damage to internal circuitry
One Hand Operation
180˚ rotating head for ease of use and manueverability
Rapid Advance
Compatible with all Huskie 14.4V Li-Ion batteries
Ergonomically designed and balanced
Audible Bypass when Predetermined Pressure is Achieved
Specifically Designed to Cut Large Jacketed Underground Cable
For Copper and Aluminum Only
5 Yr. Tool, Battery & Charger Warranty
*Will not cut ALL 500 MCM copper cable-consult factory.
REC-B660YC
6.6 Ton Cutting Tool
Description
The REC-B660YC works well for most underground aluminum cable cutting applications. It was designed to cut copper cables up to 500 MCM and aluminum up to 2″ maximum outside diameter. The extra wide jaws make cutting the larger diameter underground cables easier. The hydraulic system is designed the same as the REC-658U featuring a rapid advance ram to reduce cycle time.; Because of the larger cutting surface of the blades, the maximum size copper cable that can be cut is 500 MCM. Larger cables will simply cause the cutter to bypass, which is a built-in overload safety device to prevent damage to the tool.; The large jaws can be placed over cables that lie flat on the ground and the cables will be scooped up as the cutting jaws are closed. All cuts are clean so that there is minimal cable distortion for cable sleeving purposes.; NOTE: DO NOT CUT STEEL.
6.6 Ton Cutting Tool, (2) 14.4V/4.0Ah Li-Ion, 120VAC Charger, Tool Case
Aluminum 2″ OD
Copper 500 MCM
ACSR – Do Not Cut
| Name | Description |
|---|---|
| REC-B660YC | 6.6 Ton Cutting Tool, (2) 14.4V/4.0Ah Li-Ion, 120VAC Charger, Tool Case |
| REC-B660YCDC | 6.6 Ton Cutting Tool, (2) 14.4V/4.0Ah Li-Ion, 12VDC Charger, Tool Case |
| REC-B660YCX | 6.6 Ton Cutting Tool, Tool Case (No Batteries/Charger) |
